HP Pavilion 10-n100 Maintenance and Service Guide - Page 43
TouchScreen cable ZIF connectors on the system board 2 connectors
View all HP Pavilion 10-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Description Equipped with 4 GB of system memory, a 32-GB eMMC hard drive (SoC), and a Windows 10 operating system Equipped with 4 GB of system memory, a 32-GB eMMC hard drive (SoC), and a non-Windows operating system Thermal Material Kit (includes replacement thermal material) Spare part number 855826-601 855826-001 826599-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the system board: 1. Disconnect the following cables from the system board: (1) Audio jack board cable ZIF connector on the system board (see Audio board on page 30) (2)Touch ZIF connector on the system board (see Touch board on page 33) (3) TouchScreen cable ZIF connectors on the system board (2 connectors) (4) Speaker cable (see Speakers on page 31) (5) Antenna cable from terminal on the system board (see Wireless antenna on page 37) (6) Power/volume button board cable ZIF connector on the system board (see Power/volume button board on page 38) 2. Remove the five screws (1) that secure the system board to the display panel assembly. System board 35