HP Pavilion 10-n100 Maintenance and Service Guide - Page 41
Touch board, Remove the touch cable
View all HP Pavilion 10-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Touch board Description Touch board (includes cable) Spare part number 814725-001 Before removing the touch cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the touch cable: 1. Remove the tape (1) covering the ZIF connector. 2. Release the ZIF connector (2) to which the touch cable is attached, and then disconnect the touch board from the display panel assembly. 3. Remove the touch cable (3). Touch board 33