HP Pavilion 10-n100 Maintenance and Service Guide - Page 50
Middle frame
View all HP Pavilion 10-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Middle frame Before removing the middle frame, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 26). 5. Remove the back cover (see Back cover on page 26), and then remove the following components: a. Battery (see Battery on page 28) b. Audio jack board (see Audio board on page 30) c. Speakers (see Speakers on page 31) d. Touch board (see Touch board on page 33) e. System board (see System board on page 34) f. Wireless antenna (see Wireless antenna on page 37) g. Power/volume button board (see Power/volume button board on page 38) h. Webcam module (see Webcam module on page 40) Remove the middle frame: 1. Remove the six screws (1) that secure the middle frame to the display panel assembly. 2. Remove the middle frame (2). Reverse this procedure to install the middle frame. 42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts