HP Pavilion 13-p100 Maintenance and Service Guide - Page 44

Hinge assembly, Remove the five Phillips PM2.5×5.0 screws

Page 44 highlights

Hinge assembly Description Hinge assembly Spare part number 743228-001 Before removing the hinge, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 30). 5. Remove the base enclosure (see Base enclosure on page 31. 6. Disconnect the battery cable. Remove the hinge assembly: 1. Remove the five Phillips PM2.5×5.0 screws (1) that secure the hinges to the dock. 2. Disconnect the cables from each side of the dock (2). NOTE: When disconnecting the cable from the HDMI board, hold the board in place to disconnect the cable. The board is not secured at this point in the disassembly process. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97

Hinge assembly
Description
Spare part number
Hinge assembly
743228-001
Before removing the hinge, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page
30
).
5.
Remove the base enclosure (see
Base enclosure
on page
31
.
6.
Disconnect the battery cable.
Remove the hinge assembly:
1.
Remove the five Phillips PM2.5×5.0 screws
(1)
that secure the hinges to the dock.
2.
Disconnect the cables from each side of the dock
(2)
.
NOTE:
When disconnecting the cable from the HDMI board, hold the board in place to disconnect the
cable. The board is not secured at this point in the disassembly process.
34
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts