HP Pavilion 13-p100 Maintenance and Service Guide - Page 77
Frame, Speakers see
View all HP Pavilion 13-p100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Frame The frame is not spared. Before removing the frame, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 30). 5. Remove the following components: ● Display rear cover (see Display rear cover on page 43) ● WLAN module (see WLAN/Bluetooth combo card on page 49) ● Display cable (see Display cable on page 54) ● Touchscreen board cable (see Touchscreen board on page 56) ● Volume board cable (see Volume board on page 57) ● Bottom trim (see Bottom trim on page 59) ● Audio board (see Audio board on page 62) ● Card reader cable (see Card reader on page 64) ● Speakers (see Speakers on page 64) ● Battery (see Battery on page 66) Remove the frame: 1. Remove the nine Phillips PM2.0×3.0 screws (1) that secure the frame to the tablet. 2. Remove the Phillips broadhead PM2.0×2.0 screw (2) that secures the frame to the tablet. Tablet components 67