HP Pavilion 15-aw000 Maintenance and Service Guide - Page 57

Disconnect the zero-insertion force ZIF connector, remove the cable, which is held with tape

Page 57 highlights

g. Display assembly (see Display assembly on page 39). h. Fan (see Fan on page 41). i. Heat sink (see Heat sink on page 43). j. Fan (see Fan on page 41). k. I/O board (see I/O board on page 45). Remove the power button board: ▲ Disconnect the zero-insertion force (ZIF) connector (1), remove the cable, which is held with tape (2), remove 1 Phillips screw (3), slide the power button board (4), lift it at an angle (5), and then remove it (6). Reverse this procedure to install the power button board. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

g.
Display assembly (see
Display assembly
on page
39
).
h.
Fan (see
Fan
on page
41
).
i.
Heat sink (see
Heat sink
on page
43
).
j.
Fan (see
Fan
on page
41
).
k.
I/O board (see
I/O board
on page
45
).
Remove the power button board:
Disconnect the zero-insertion force (ZIF) connector
(1)
, remove the cable, which is held with tape
(2)
,
remove 1 Phillips screw
(3)
, slide the power button board
(4)
, lift it at an angle
(5)
, and then remove it
(6)
.
Reverse this procedure to install the power button board.
Component replacement procedures
47