HP Pavilion 15-aw000 Maintenance and Service Guide - Page 67

Remove the TouchPad

Page 67 highlights

a. Battery (see Battery on page 30). b. Optical drive (see Optical drive (select products only) on page 26). c. Hard drive (see Hard drive on page 31). d. Solid-state drive (see SSD (M.2) on page 33). e. Memory (see Memory on page 34). f. WLAN module (see WLAN module on page 37). g. Fan (see Fan on page 41). h. Heat sink (see Heat sink on page 43). i. I/O board (see I/O board on page 45). j. Power button board (see Power button board on page 46). k. System board (see System board on page 48). l. SD card reader board (see SD card reader on page 50). m. Speakers (see Speakers on page 53). Remove the TouchPad: 1. Remove the film covering the TouchPad (1). 2. Remove 3 Phillips 2.0x2.0 screws (2), and then lift to remove the TouchPad bracket (3). 3. Disconnect the TouchPad cable, and then remove the metal shield covering the TouchPad (1). Component replacement procedures 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

a.
Battery (see
Battery
on page
30
).
b.
Optical drive (see
Optical drive (select products only)
on page
26
).
c.
Hard drive (see
Hard drive
on page
31
).
d.
Solid-state drive (see
SSD (M.2)
on page
33
).
e.
Memory (see
Memory
on page
34
).
f.
WLAN module (see
WLAN module
on page
37
).
g.
Fan (see
Fan
on page
41
).
h.
Heat sink (see
Heat sink
on page
43
).
i.
I/O board (see
I/O board
on page
45
).
j.
Power button board (see
Power button board
on page
46
).
k.
System board (see
System board
on page
48
).
l.
SD card reader board (see
SD card reader
on page
50
).
m.
Speakers (see
Speakers
on page
53
).
Remove the TouchPad:
1.
Remove the film covering the TouchPad
(1)
.
2.
Remove 3 Phillips 2.0x2.0 screws
(2)
, and then lift to remove the TouchPad bracket
(3)
.
3.
Disconnect the TouchPad cable, and then remove the metal shield covering the TouchPad
(1)
.
Component replacement procedures
57