HP Pavilion TouchSmart 11-e040ca HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 52
Power button board, Remove the two Phillips PM2.0×2.75 screws
View all HP Pavilion TouchSmart 11-e040ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5. Remove the bottom cover from the top cover. Reverse this procedure to install the bottom cover. Power button board Description Power button board (includes cable) Spare part number 730899-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Service cover (see Service cover on page 28) b. Display assembly (see Display assembly on page 37) c. Bottom cover (see Bottom cover on page 42) Remove the power button board: 1. Remove the two Phillips PM2.0×2.75 screws (1) that secure the power button board to the top cover. 2. Detach the power button board cable (2) from the top cover. (The power button board cable is attached to the top cover with double-sided tape.) 44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts