HP Pavilion TouchSmart 11-e040ca HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 57

Fan, Disconnect the fan cable

Get HP Pavilion TouchSmart 11-e040ca PDF manuals and user guides View all HP Pavilion TouchSmart 11-e040ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Reverse this procedure to install the media card reader board. Fan Description Fan (includes cable and cowling) Spare part number 730903-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Service cover (see Service cover on page 28) b. Display assembly (see Display assembly on page 37) c. Bottom cover (see Bottom cover on page 42) Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Detach the cowling tape (2) that secures the fan to the heat sink. 3. Remove the two Phillips PM2.0×4.5 screws (3) that secure the fan to the system board. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Reverse this procedure to install the media card reader board.
Fan
Description
Spare part number
Fan (includes cable and cowling)
730903-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
27
), and then remove the following components:
a.
Service cover (see
Service cover
on page
28
)
b.
Display assembly (see
Display assembly
on page
37
)
c.
Bottom cover (see
Bottom cover
on page
42
)
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Detach the cowling tape
(2)
that secures the fan to the heat sink.
3.
Remove the two Phillips PM2.0×4.5 screws
(3)
that secure the fan to the system board.
Component replacement procedures
49