HP Pavilion TouchSmart 11-e040ca HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 63

Heat sink, and then remove the following components

Get HP Pavilion TouchSmart 11-e040ca PDF manuals and user guides View all HP Pavilion TouchSmart 11-e040ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

6. Remove the system board (3) by sliding it up and to the left an angle. Reverse this procedure to install the system board. Heat sink Description Heat sink (includes 4 captive screws and replacement thermal material) Spare part number 730902-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Service cover (see Service cover on page 28) b. Hard drive (see Hard drive on page 29) c. Display assembly (see Display assembly on page 37) d. Bottom cover (see Bottom cover on page 42) Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
6.
Remove the system board
(3)
by sliding it up and to the left an angle.
Reverse this procedure to install the system board.
Heat sink
Description
Spare part number
Heat sink (includes 4 captive screws and replacement thermal material)
730902-001
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
27
), and then remove the following components:
a.
Service cover (see
Service cover
on page
28
)
b.
Hard drive (see
Hard drive
on page
29
)
c.
Display assembly (see
Display assembly
on page
37
)
d.
Bottom cover (see
Bottom cover
on page
42
)
Component replacement procedures
55