HP Pavilion TouchSmart 11-e040ca HP Pavilion TouchSmart 11 Notebook PC - Maint - Page 56
Media card reader board, Remove the Phillips PM2.0×4.5 screw
View all HP Pavilion TouchSmart 11-e040ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Media card reader board Description Media card reader board (includes cable) Spare part number 730897-001 Before removing the media card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27), and then remove the following components: a. Service cover (see Service cover on page 28) b. Display assembly (see Display assembly on page 37) c. Bottom cover (see Bottom cover on page 42) Remove the media card reader board: 1. Release the ZIF connector (1) to which the media card reader board cable is attached, and then disconnect the media card reader board cable from the system board. 2. Remove the Phillips PM2.0×4.5 screw (2) that secures the media card reader board to the top cover. 3. Remove the media card reader board (4) and cable. 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts