HP Pavilion TouchSmart 15-n300 Maintenance and Service Guide - Page 76
Optical drive connector cable
View all HP Pavilion TouchSmart 15-n300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Optical drive connector cable NOTE: The optical drive connector cable is included with the Optical Drive, spare part number 732075-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Optical drive (see Optical drive on page 45). b. Service door (see Service door on page 42). c. WLAN module (see WLAN module on page 44). d. Memory module (see Memory module on page 42). e. Keyboard (see Keyboard on page 51). f. Top cover (see Top cover on page 55). Remove the optical drive connector cable: 1. Disconnect the optical drive connector cable (1) from the system board. 2. Release the optical drive connector cable from the clip (2) built into the base enclosure. 3. Remove the optical drive connector cable. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts