HP Pavilion dv4-3000 HP Pavilion dv4 Entertainment PC - Maintenance and Servic - Page 69
USB 3.0 board, Remove the audio/USB 2.0 board
View all HP Pavilion dv4-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the audio/USB 2.0 board: 1. Position the computer right-side up, with the front toward you. 2. Release the ZIF connector (1) to which the audio/USB 2.0 board is connected, and then disconnect the cable (2) from the system board. 3. Remove the Phillips 3.5x2.5 screw (3) that secures the audio/USB 2.0 board to the base enclosure. 4. Lift the audio/USB 2.0 board straight up (4) to remove it from the computer. Reverse this procedure to install the audio/USB 2.0 board. USB 3.0 board Description USB 3.0 board Spare part number 650704-001 Before removing the USB 3.0 board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 61