HP Pavilion dv4-3000 HP Pavilion dv4 Entertainment PC - Maintenance and Servic - Page 71
Slide the TouchPad LED board
View all HP Pavilion dv4-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Before removing the TouchPad LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 33) b. Memory module (see Memory module on page 34 ) c. Optical drive (see Optical drive on page 39) d. Keyboard (see Keyboard on page 41) e. Top cover (see Top cover on page 46) Remove the TouchPad LED board: 1. Position the computer right-side up, with the front toward you. 2. Slide the TouchPad LED board (1) out from the bracket holding it in the base enclosure. 3. Remove the TouchPad LED board from the base enclosure (2). Reverse this procedure to install the TouchPad LED board. Component replacement procedures 63