HP Pavilion dv4-3000 HP Pavilion dv4 Entertainment PC - Maintenance and Servic - Page 82
Mass storage device connector cables, TouchPad LED board see
View all HP Pavilion dv4-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Mass storage device connector cables NOTE: The optical drive connector cable and hard drive connector cable are available in the Cable Kit, spare part number 640363-001. Before removing either of the mass storage device connector cables, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 33) b. Memory module (see Memory module on page 34 ) c. Optical drive (see Optical drive on page 39) d. Keyboard (see Keyboard on page 41) e. Top cover (see Top cover on page 46) f. Display assembly (see Display assembly on page 52) g. Speaker assembly (see Speaker assembly on page 59) h. Audio/USB 2.0 board (see Audio/USB 2.0 board on page 60) i. TouchPad LED board (see TouchPad LED board on page 62) j. Power connector (see Power connector on page 66) k. System board (see System board on page 68) Remove the optical drive bracket: 1. Remove the six Phillips 2.5x2.5 screws (1) that secure the optical drive bracket to the base enclosure. 2. Remove the optical drive bracket (2) from the base enclosure. 3. Lift the optical drive connector cable from the base enclosure. 74 Chapter 4 Removal and replacement procedures