HP Pavilion zt1200 HP Pavilion zt1000/xz300 and Omnibook xt1500 Series Noteboo - Page 48

Removing an SDRAM Module The notebook has no SDRAM built into its motherboard, but has two slots for PC133 SDRAM modules: a system SDRAM slot beneath the keyboard (containing an SDRAM module installed at the factory), and an expansion slot on the bottom of the unit. Table 7. SDRAM Module Replacement Part Numbers Description Module, SDRAM, 128 MB DDR, PC266 SODIMM Module, SDRAM, 256 MB DDR, PC266 SODIMM Module, SDRAM, 512 MB DDR, PC266 SODIMM Part Number F4694-60901 F4695-60901 F4696-60901 Exchange Part Number Caution Provide proper grounding and handle the SDRAM module only by its edges, or you could damage the module through electrostatic discharge. Required Equipment • #0 Phillips screwdriver. Removing an Expansion SDRAM Module Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. On the bottom of the notebook, loosen the screw holding the SDRAM cover (the cover retains the screws), and remove the cover. 3. Press outward to release the latches at the sides of the SDRAM module (so that the free edge of the module pops up), then pull the module out of the connector. Figure 17. Removing an Expansion SDRAM Module 48 Removing and Replacing Parts zt1000/xz300 and xt1500 Series Troubleshooting and Self-Repair Guide