HP Photosmart 715 HP Photosmart 715 digital camera - (English) User Guide - Page 40
Unloading images to a Windows computer - user manual
View all HP Photosmart 715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
To connect the camera to a computer running Windows 1 Make sure that the camera is turned off. 2 Plug the smaller end of the USB cable into the camera. 3 Plug the other end of the cable into any USB port on the computer. Note When the camera is connected to a computer, only the switch operates. The other camera buttons do not respond. Unloading images to a Windows computer Unloading is the process of copying images from the CF memory card in the camera to a computer. You can unload images from your camera in one of three ways: automatically, manually, or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method. For descriptions of the other methods, see the online documentation with the HP Photo Imaging software. Tip To conserve battery power, use an HP-approved AC adapter (optional) when you are unloading images to a computer. Follow the procedure in this section if your computer runs Windows Me, Windows XP, Windows 2000, or Windows 98. To unload images to a Windows computer 1 Connect the camera to the computer using the USB cable. 2 Turn on the camera. 32 HP photosmart 715 user guide