HP Photosmart C4600 User Guide - Page 98
Print cartridge messages, Need alignment or alignment failed, Low on ink
View all HP Photosmart C4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 10 Cause: The last time the product was used, it was not turned off properly. The product can be damaged if it is turned off by turning off the switch on a power strip or by using a wall switch. Print cartridge messages The following is a list of print cartridge error messages: • Low on ink • Need alignment or alignment failed • Print cartridges incorrectly installed • Non-HP cartridges installed • Print cartridge is missing, incorrectly installed, or not intended for your product • Printing in ink-backup mode • Print cartridges missing or not detected • Incompatible print cartridges • Print cartridge is not intended for use in this product • Print cartridges in wrong slot • Print cartridge problem • Previously used genuine HP cartridge installed • Original HP ink has been depleted • General printer error Low on ink Solution: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable. If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another product, the ink level indicator may be inaccurate or unavailable. For HP product return and recycling information, visit us at: www.hp.com/recycle. Cause: The indicated print cartridges were estimated to be low on ink and might need to be replaced soon. Need alignment or alignment failed Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Incorrect type of paper is loaded in the input tray • Solution 2: Make sure the protective tape is removed from the print cartridges • Solution 3: Check if print cartridges are fully inserted • Solution 4: Align newly installed print cartridges • Solution 5: Print cartridge might be defective Solve a problem 96 Solve a problem