HP Presario CQ40-200 Compaq Presario CQ40 Notebook PC - Maintenance and Servic - Page 76
Num lock light cable, Remove the two Phillips PM2.5×7.0 screws
View all HP Presario CQ40-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
3. Turn the computer right-side up, with the front toward you. 4. Disconnect the following cables from the system board: ● Bluetooth module cable (1) ● TouchPad cable (2) ● USB board cable (3) and release from top cover clips (4) ● Num lock light cable (5) 5. Remove the two Phillips PM2.5×7.0 screws (1) that secure the top cover to the computer. 6. Lift up the rear edge of the top cover until it releases from the base (2). 68 Chapter 4 Removal and replacement procedures
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the following cables from the system board:
●
Bluetooth module cable
(1)
●
TouchPad cable
(2)
●
USB board cable
(3)
and release from top cover clips
(4)
●
Num lock light cable
(5)
5.
Remove the two Phillips PM2.5×7.0 screws
(1)
that secure the top cover to the computer.
6.
Lift up the rear edge of the top cover until it releases from the base
(2)
.
68
Chapter 4
Removal and replacement procedures