HP Presario CQ40-200 Compaq Presario CQ40 Notebook PC - Maintenance and Servic - Page 88
Remove the two black Phillips PM2.5×6.0 screws that secure the system board to the computer
View all HP Presario CQ40-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
2. Disconnect the following cables from the system board (if still connected): ● (1) Modem cable ● (2) Audio board cable ● (3) Fan cable 3. Remove the two silver captive Phillips PM1.5×9.0 screws on the expansion port connector (1). 4. Remove the two black Phillips PM2.5×6.0 screws that secure the system board to the computer (2). 5. Lift the right side of the system board (1) until it rests at an angle (2). 80 Chapter 4 Removal and replacement procedures
2.
Disconnect the following cables from the system board (if still connected):
●
(1)
Modem cable
●
(2)
Audio board cable
●
(3)
Fan cable
3.
Remove the two silver captive Phillips PM1.5×9.0 screws on the expansion port connector
(1)
.
4.
Remove the two black Phillips PM2.5×6.0 screws that secure the system board to the computer
(2)
.
5.
Lift the right side of the system board
(1)
until it rests at an angle
(2)
.
80
Chapter 4
Removal and replacement procedures