HP Presario CQ60-100 HP G60 Notebook PC & Compaq Presario CQ60 Notebook PC - Page 47

Removal and replacement procedures Hard drive ✎ All hard drive spare part kits include a hard drive bracket and hard drive connector. The hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit. Description 120-GB, 5400-rpm hard drive 160-GB, 5400-rpm hard drive 250-GB, 5400-rpm hard drive 320-GB, 5400-rpm hard drive Hard Drive Hardware Kit Spare part number 488742-001 488743-001 488744-001 504442-001 504059-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). Remove the hard drive: 1. Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer. 2. Lift the right side of the hard drive cover 2, swing it up and to the left, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 486621-001. Maintenance and Service Guide 4-9