HP Presario CQ60-100 HP G60 Notebook PC & Compaq Presario CQ60 Notebook PC - Page 52

Loosen the Phillips PM2.5X6.0 captive screw, Remove the two Phillips PM2.0×3.0 screws

Get HP Presario CQ60-100 - Notebook PC PDF manuals and user guides View all HP Presario CQ60-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Removal and replacement procedures Remove the WLAN module: 1. Remove the WLAN module cover: a. Loosen the Phillips PM2.5X6.0 captive screw 1 that secures the WLAN module component cover to the computer. b. Lift the right side of the WLAN module cover 2, swing it to the left, and remove it. The WLAN module cover is included in the Plastics Kit, spare part number 486621-001. 2. Disconnect the two antenna cables 1 from the wireless module. ✎ The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. 3. Remove the two Phillips PM2.0×3.0 screws 2 that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 4. Remove the WLAN module 3 by pulling the module away from the slot at an angle. ✎ WLAN modules are designed with a notch 4 to prevent incorrect insertion. Reverse this procedure to install the WLAN module. 4-14 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
4–14
Maintenance and Service Guide
Removal and replacement procedures
Remove the WLAN module:
1. Remove the WLAN module cover:
a.
Loosen the Phillips PM2.5X6.0 captive screw
1
that secures the WLAN module component cover to the
computer.
b.
Lift the right side of the WLAN module cover
2
, swing it to the left, and remove it. The WLAN module
cover is included in the Plastics Kit, spare part number 486621-001.
2. Disconnect the two antenna cables
1
from the wireless module.
✎
The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN antenna
cable is connected to the WLAN module “Aux” terminal.
3.
Remove the two Phillips PM2.0×3.0 screws
2
that secure the WLAN module to the computer. (The edge of the
module opposite the slot rises away from the computer.)
4. Remove the WLAN module
3
by pulling the module away from the slot at an angle.
✎
WLAN modules are designed with a notch
4
to prevent incorrect insertion.
Reverse this procedure to install the WLAN module.