HP Presario CQ60-100 HP G60 Notebook PC & Compaq Presario CQ60 Notebook PC - Page 59

Remove the caps lock LED

Get HP Presario CQ60-100 - Notebook PC PDF manuals and user guides View all HP Presario CQ60-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Removal and replacement procedures Remove the display assembly: 1. Pull the antenna cables through the opening in the top cover 1 and disengage the cables from the clips 2 in the routing channel leading to the display hinge. 2. Disconnect the display panel cable 3 from the system board and make sure that the cable is out of its routing channel. 3. Disconnect the microphone cable 4 from the system board and release it from the clips that attach it to the top cover. 4. Remove the caps lock LED 5 from its mounting clips on the top cover. Ä CAUTION: The display will be unsupported when the following screws are removed. To prevent damage to the display assembly, support it before removing the screws. 5. Remove the four Phillips PM2.5x9.0 screws 1 securing the display hinges to the computer. 6. Remove the display panel 2. Maintenance and Service Guide 4-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Removal and replacement procedures
Maintenance and Service Guide
4–21
Remove the display assembly:
1.
Pull the antenna cables through the opening in the top cover
1
and disengage the cables from the clips
2
in the
routing channel leading to the display hinge.
2. Disconnect the display panel cable
3
from the system board and make sure that the cable is out of its routing
channel.
3. Disconnect the microphone cable
4
from the system board and release it from the clips that attach it to the top
cover.
4. Remove the caps lock LED
5
from its mounting clips on the top cover.
Ä
CAUTION:
The display will be unsupported when the following screws are removed. To prevent damage to the display
assembly, support it before removing the screws.
5. Remove the four Phillips PM2.5x9.0 screws
1
securing the display hinges to the computer.
6. Remove the display panel
2
.