HP Presario CQ60-100 HP G60 Notebook PC & Compaq Presario CQ60 Notebook PC - Page 67
Release the ZIF connector to which the TouchPad cable is attached
View all HP Presario CQ60-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures 5. Remove the following screws: a. Remove the four Phillips PM2.0x6.0 screws 1 securing the top cover to the base enclosure. b. Then remove the Phillips PM2.0x3.0 screw 2 securing the top cover to the base enclosure. 6. Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad cable from the system board. Maintenance and Service Guide 4-29
Removal and replacement procedures
Maintenance and Service Guide
4–29
5. Remove the following screws:
a.
Remove the four Phillips PM2.0x6.0 screws
1
securing the top cover to the base enclosure.
b.
Then remove the Phillips PM2.0x3.0 screw
2
securing the top cover to the base enclosure.
6. Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad cable from
the system board.