HP Presario CQ60-100 HP G60 Notebook PC & Compaq Presario CQ60 Notebook PC - Page 76
Remove the four Phillips PM2.5x5.0 screws, that secure the system board.
View all HP Presario CQ60-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Removal and replacement procedures Remove the system board: 1. Disconnect the USB board cable 1 from its mounting clip in the base enclosure. 2. Disconnect the Bluetooth cable 2 from the system board. 3. Disconnect the RJ-11 cable 3 from the system board. 4. Disconnect the audio cable 4 from the system board. Ä CAUTION: Do not attempt to disconnect the optical extension board before removing the system board. Otherwise, you will damage the locator pin on the optical extension board. 5. Remove the four Phillips PM2.5x5.0 screws 1 that secure the system board. 6. Remove the two Phillips PM2.5x5.0 screws 2 that secure the optical extension board. 4-38 Maintenance and Service Guide
4–38
Maintenance and Service Guide
Removal and replacement procedures
Remove the system board:
1. Disconnect the USB board cable
1
from its mounting clip in the base enclosure.
2. Disconnect the Bluetooth cable
2
from the system board.
3. Disconnect the RJ-11 cable
3
from the system board.
4. Disconnect the audio cable
4
from the system board.
Ä
CAUTION:
Do not attempt to disconnect the optical extension board before removing the system board. Otherwise, you will
damage the locator pin on the optical extension board.
5. Remove the four Phillips PM2.5x5.0 screws
1
that secure the system board.
6. Remove the two Phillips PM2.5x5.0 screws
2
that secure the optical extension board.