HP ProLiant 1500 ProLiant Server Troubleshooting Guide - Page 176
-6099, Network Interface Controllers Test Er, Table B-10
View all HP ProLiant 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Test Error Codes 6000-6099, Network Interface Controllers Test Error Codes The 6000 series of diagnostic error codes identifies failures with various network interface controllers. Corrective action may require replacement of the controller. Table B-10: Network Interface Controllers Test Error Codes Error Code 6000-XX 6001-XX 6002-XX 6014-XX 6016-XX 6028-XX 6029-XX 6089-XX 6090-XX 6091-XX 6092-XX Description Recommended Action Network card ID failed Network card setup failed Network card transmit failed Network card configuration failed Network card reset failed Network card internal failed Network card external failed Network card open failed Network card initialization failed Network card internal loopback failed Network card external loopback failed The following steps apply to error codes 6000-XX through 6089-XX: 1. Check the controller installation in the EISA slot and retest. 2. Check the interrupt type and number setting and retest. 3. Check the media connection at the controller and Multistation Access Unit (MAU) and retest. 4. Check the media speed (4/16) and type Unshielded Twisted Pair/Shielded Twisted Pair (UTP/STP) settings and retest. 5. Check the MAU, cabling, or other network components and retest. 6. Replace the controller and retest. HP Servers Troubleshooting Guide B-11