HP ProLiant 1500 ProLiant Server Troubleshooting Guide - Page 185
POST Error Messages, HP Servers Troubleshooting Guide, Utility to View/Modify
View all HP ProLiant 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
POST Error Messages Table C-2: Non-Numeric Error Messages or Beeps Only continued Error Code Audible Beeps Probable Source of Problem Action No Keyboard Present None Keyboard failure occurred, or keyboard not connected to server. 1. Turn off the computer, and then reconnect the keyboard. 2. Be sure that no keys are depressed or stuck. 3. If this does not solve the problem, replace the keyboard. No SCSI Devices Detected None No SCSI devices are connected to the boot controller. Check configuration, SCSI cable, connected drives, and SCSI IDs. Non-System disk or disk error None No bootable disk partition was found on the boot drive. 1. Remove diskette from diskette drive. 2. Check controller order in server setup utility. 3. Check boot order in server setup utility. 4. Reinstall operating system. Parity Check 2 None A PCI device generated a 1. Remove recently parity error 2. installed PCI adapters. 2. Reinstall the adapters one at a time to determine which one is generating errors. 3. Replace the failed device. PCI User Definable Features Detected and Configured with Default Settings. Run System Configuration Utility to View/Modify Settings None PCI card is not properly configured. Run the server setup utility to make desired changes. continued HP Servers Troubleshooting Guide C-5