HP ProLiant 1500 ProLiant Server Troubleshooting Guide - Page 191
Comport Invalid, PCI Comport, Invalid, Incorrect IRQ, Video, Controller Must, be on Primary, PCI Bus
View all HP ProLiant 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
POST Error Messages Table C-3: 100 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 171-2-IRC Configuration Invalid None One or more of the following messages may also be displayed: • Comport Invalid • PCI Comport Invalid • Incorrect IRQ • Video Controller Must be on Primary PCI Bus 172-1-Configuration NVRAM invalid None Nonvolatile configuration corrupted or jumper installed. 172-Configuration Non-volatile Memory Invalid None Nonvolatile configuration corrupted. 172-Default System Configuration Installed! Run System Configuration Utility to View/Modify Settings None Nonvolatile configuration corrupted. The default system configuration has been installed. 172-1-Configuration Non-volatile Memory Invalid None Nonvolatile configuration corrupted. 172-System Configuration Nonvolatile Memory Invalid. Initialization Aborted. None Battery is low or not working. 173-PCI Config Slot Mismatch None Board replaced, configuration not updated. Action Run the server setup utility and correct. Run the server setup utility and correct. Run the server setup utility and correct. Run the server setup utility to make any changes to the default configuration. Run the server setup utility and correct. Turn off the server, replace the battery located on the sideplane board, and then reboot the system. The default nonvolatile configuration will be loaded. Run the server setup utility and correct. continued HP Servers Troubleshooting Guide C-11