HP ProLiant 1500 ProLiant Server Troubleshooting Guide - Page 227
Series POST Error Messages, Be sure that SCSI IDs
View all HP ProLiant 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
POST Error Messages 1700 Series POST Error Messages Table C-13: 1700 Series POST Error Messages Error Code 1701-SCSI Controller Failure Audible Beeps None Probable Source of Problem Embedded SCSI controller has failed or a connected device is preventing normal operation. 1702-SCSI Cable Error Detected None SCSI cable has failed. 1704-Unsupported Virtual Mode Disk Operation DOS Driver Required None The operating system currently running does not support virtual DMA service. Action 1. Check SCSI cables and be sure that they are fully seated. 2. Be sure that SCSI IDs are assigned correctly at each SCSI device. 3. Remove SCSI cables from the controller and observe if the failure still occurs. If necessary, replace the cables. 4. Run Diagnostics. 5. Remove individual SCSI devices from the cable to identify a suspect device. 6. Replace failed assembly. 1. Reseat the SCSI cable on the controller and all connected devices. 2. Check the SCSI cable at all connectors for bent pins. 3. Replace SCSI cable. Load or update the SCSI device driver appropriate for this operating system. continued HP Servers Troubleshooting Guide C-47