HP ProLiant BL620c OneCommand Manager Application User Manual (P004343-01A Ver - Page 182

3. The first value is for PGID0, the second is for PGID1, and so on until PGID7. 4. All eight bandwidths must be specified. Parameters: WWPN - World Wide Port Name of the adapter for which you want to set the bandwidth percentage of a priority group. MAC - MAC address of the NIC or iSCSI port for which you want to set the bandwidth percentage of a priority group. BW - Bandwidth that is allocated for each Priority Group. Example: This command sets the bandwidth of PGID0 to 50%, PGID1 to 40% and the rest to 0%. hbacmd setcnapgbw 10:00:00:00:c9:3c:f7:88 50 50 0 0 0 0 0 0 FCoE Commands GetFIPParams Note: Not supported for LP21000 series adapters. Supported by: Windows, Solaris SFS, Linux and VMware ESX Server Syntax: hbacmd GetFIPParams Description: Show the FIP parameters of the FC port. Parameters: WWPN - World Wide Port Name of the adapter. SetFIPParam Note: Not supported for LP21000 series adapters. Supported by: Windows, Solaris SFS, Linux and VMware ESX Server Syntax: hbacmd SetFIPParam Description: Set the various FIP parameters of the FC port. Parameters: WWPN - World Wide Port Name of the adapter. pfabric - 8 byte fabric name (format XX:XX:XX:XX:XX:XX:XX:XX) pswitch - 8 byte switch name (format XX:XX:XX:XX:XX:XX:XX:XX) vlanid - 2 byte VLAN ID [0-4095] Or 'any' for any VLANID fcmap - 3-byte FC_map, 0x0EFCxx cinvlanid - 2-byte VLAN_ID [0-4095] GetFCFInfo Note: Not supported for LP21000 series adapters. The OneCommand Utility User Manual Page 175