Home » HP Manuals » Servers » HP ProLiant BL620c » Manual Viewer

HP ProLiant BL620c OneCommand Manager Application User Manual (P004343-01A Ver - Page 53

The OneCommand Utility User Manual, Port Information, Port Information Field Definitions

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

3. Select the Port Information tab. Figure 19: Fibre Channel Port Information tab Port Information Field Definitions Port Attributes Area Field Definitions • Port WWN - The Port World Wide Name of the adapter. • Node WWN - The Node World Wide Name of the selected adapter. • Fabric Name or Host Name - The Fabric Name field is displayed in Host view. This is a 64-bit worldwide unique identifier assigned to the fabric. The Host Name is displayed in Fabric view. The host name is the name of the host containing the adapter. (Not supported on VMware ESX servers being managed through the CIM interface.) • Boot Version - The version of boot code installed on the selected adapter port. If the boot code is disabled, the field displays "Disabled". • Port FC ID - The Fibre Channel ID for the selected adapter port. • Driver Version - The version of the driver installed for the adapter. • Driver Name - The executable file image name for the driver as it appears in the Emulex driver download package. • Firmware Version - The version of Emulex firmware currently active on the adapter port. • Discovered Ports - The number of mapped and unmapped ports found during discovery by the Emulex adapter driver. The mapped ports are targets and the unmapped ports are non-targets such as switches or adapters. • Port Type - The current operational mode of the selected adapter's port. The OneCommand Utility User Manual Page 46

Section	Page
Introduction	8
Supported Features by Operating System	9
Known Issues	10
Installing and Uninstalling OneCommand Manager Application Components	11
Installing the OneCommand Manager Application	11
In Windows	11
In Solaris SFS	11
In Linux	12
In VMware ESX Server	13
Installing the OneCommand Manager Application Web Launch Interface	13
Prerequisites	13
Procedures	14
Installing the OneCommand Manager Application Command Line Interface	15
In Windows	16
In a New VMware ESX Server	16
Prerequisites	17
Procedures	17
In a VMware ESX Server with an Existing HBAnyware CLI Kit Installed	17
Uninstalling Older HBAnyware Kits on VMware	17
In a New Linux System	18
Prerequisites	18
Procedures	18
In a Linux System with an Existing HBAnyware CLI Kit InstalledI	19
Uninstalling Older HBAnyware Kits on Linux	19
In Solaris SFS	20
Prerequisites	20
Procedures	20
Upgrading from the OneCommand Manager Application CLI to the Full- Featured OneCommand Manager Application Enterprise Kit	21
In Windows	21
In Linux	21
In Solaris SFS	21
In VMware ESX Server	21
Uninstalling the OneCommand Manager Application	21
In Windows	22
In Solaris SFS	22
In Linux	22
In VMware	22
Uninstalling the OneCommand Manager Application Web Launch Interface Only	22
Starting the OneCommand Manager Application	24
Starting the OneCommand Manager Application Web Launch Interface	24
Managing Files when Running the OneCommand Manager Application Web Launch Interface	24
Using the OneCommand Manager Application	25
The OneCommand Manager Application Window Element Definitions	25
The Menu Bar	26
The Toolbar	26
The Toolbar Buttons	26
The Discovery-Tree	27
Discovery-Tree Icons	28
Expanding or Collapsing the Discovery-Tree View	29
The Property Tabs	29
The Status Bar	29
Changing Management and Read-Only Mode	29
In Windows	30
In Solaris SFS	30
In Linux	30
Printing Help Information	31
Configuring Discovery	32
Automatic Fibre Channel Discovery	32
Remote SAN Management Using TCP/IP Access Protocol	32
The Hosts File	33
Manually Editing the Hosts File	33
Copying the File	34
Adding a Single Host	35
Adding a Range of Hosts	36
Removing Hosts	38
Configuring Discovery, CIM Credentials and TCP/IP Settings	38
Configuring iSCSI Target Discovery	40
Adding Target Portals	41
Specifying Portal Specific Login Options	41
Removing a Target Portal	42
Logging into Targets	43
Adding an iSCSI Target	43
Removing Targets	44
Viewing Target Sessions	44
Logging out of Target Sessions	44
Viewing Discovery Information	47
Viewing Host Information	48
Viewing Adapter Information	50
Viewing Fibre Channel Adapter Information	50
Viewing iSCSI Adapter Information	51
Viewing NIC-Only Adapter Information	52
Viewing Port Information	52
Viewing Fibre Channel Port Information	52
Viewing FCoE Port Information	54
Viewing iSCSI Port Information	56
Viewing NIC Port Information	58
Viewing Physical Port Information	59
Viewing Port Statistics	60
Viewing Fibre Channel Port Statistics	60
Viewing iSCSI Statistics	63
Viewing Virtual Port Information (FC and FCoE Adapters Only)	65
Viewing Fabric Information	65
Viewing Transceiver Information	67
Viewing Fibre Channel Transceiver Information	67
Viewing OneConnect Adapter Transceiver Information	68
Viewing Vital Product Data (VPD)	70
Viewing Maintenance/Firmware Information	70
Viewing Fibre Channel Maintenance Information	71
Viewing FCoE Maintenance Information	73
Viewing OneConnect Adapter Firmware Information	74
Viewing Target Information	75
Viewing Fibre Channel Target Information	76
Viewing iSCSI Target Information	76
Viewing LUN Information	78
Viewing Fibre Channel LUN Information	78
Viewing iSCSI LUN Information	80
Viewing Fibre Channel Target Mapping (Windows and Solaris SFS)	81
Viewing Target Mapping (Linux and VMware ESX)	82
Viewing iSCSI and NIC PCI Registers	83
Viewing iSCSI PCI Registers	83
Viewing NIC PCI Registers	84
Managing Adapters	85
Configuring the Fibre Channel or FCoE Adapter Driver	85
The Host Driver Parameters Tab	85
Setting Driver Parameters	87
Setting Driver Parameters for a Single Adapter	87
Restoring All Parameters to Their Earlier Values	88
Resetting All Default Values	88
Setting an Adapter Parameter Value to the Host Adapter Parameter Value	89
Saving Adapter Driver Parameters to a File	89
Setting Driver Parameters for All Adapters in a Host	89
Changing Non-dynamic Parameter Values (Linux 8.2)	90
Changing Non-dynamic Parameter Values (VMware ESX)	91
Creating a Batch Mode Driver Parameters File	91
Assigning Batch Mode Parameters	92
Configuring CEE (Converged Enhanced Ethernet) Parameters	94
Configuring CEE/FCoE-Specific Parameters (LP21000 Series Adapters Only)	94
Configuring CEE Parameters for FCoE Adapter Ports	95
Configuring CEE Parameters for iSCSI Adapter Ports	100
Configuring FCoE Initialization Protocol (FIP) for FCoE Adapters	103
Managing Ports	106
Changing Adapter Port Names (FC Ports Only)	106
Resetting Adapter Ports	106
Modifying TCP/IP iSCSI Port Configuration	107
Advanced TCP/IP Configuration	109
Configuring iSNS for iSCSI Target Discovery	110
Enabling and Disabling Fibre Channel Ports	111
Enabling and Disabling Physical Ports (OneConnect Adapters Only)	111
Configuring iSCSI Port Initiator Login	112
Changing World Wide Name Configuration (FC and FCoE Ports Only)	115
Creating and Deleting Virtual Ports (FC and FCoE Ports Only)	118
Creating Virtual Ports	118
Deleting Virtual Ports	120
Using FC-SP DHCHAP Authentication (Windows, Linux 8.2 and Solaris SFS)	122
Linux Considerations	123
Enabling Authentication	123
The DHCHAP Tab	124
Changing Authentication Configuration	125
Changing Your Password	125
Viewing the Error and Event Log	126
Updating Adapter Firmware	127
Updating Firmware for a Single Adapter	127
Updating Firmware for Multiple Adapters	128
Updating CEE Firmware for a Single Adapter (LP21000 Series Adapters Only)	130
Updating CEE Firmware on Multiple Adapters (LP21000 Series Adapters Only)	133
Mapping and Masking (FC and FCoE Ports Only)	135
Automapping SCSI Devices (Windows)	135
Mapping and Masking Defaults (Windows)	136
Masking and Unmasking LUNs (Windows)	136
Using Automapping and Persistent Binding (Windows)	138
Changing Automapping Settings	138
Adding a Persistent Binding	139
Binding a Target that Does Not Appear in the Persistent Binding Table	140
Adding New Targets Using sd.conf (Solaris 8, 9 and 10)	141
Configuring Boot from SAN	141
Boot Types	142
Boot Device Parameters	142
Configuring Advanced Settings (Boot from SAN)	146
Exporting SAN Information	150
Diagnostics	151
Fibre Channel Diagnostics	151
Viewing Flash Contents, PCI Registers and Wakeup Information	152
Viewing Flash Contents	152
Viewing Overlay Details	153
Viewing the PCI Registers	153
Running a Quick Test	153
Running a Power On Self Test (POST)	154
Using Beaconing	154
Creating Diagnostic Dumps	154
Running Advanced Diagnostic Tests	155
Running Loopback Tests	156
Loopback Test Combinations	156
Running End-to-End (ECHO) Tests	158
Saving the Log File	159
iSCSI, FCoE and NIC-Only Diagnostics (OneConnect Adapters Only)	160
OneConnect iSCSI, FCoE and NIC-Only Loopback Test Combinations	161
Saving the Log File	163
Using the OneCommand Manager Application Command- Line Interface	164
Using the CLI Client	167
Syntax Rules	167
The CLI Client Command Reference	167
Parameters Not Supported by CIM Interface	169
Read-Only Mode	173
Help Commands	173
Attributes Commands	174
Authentication Commands	175
Boot Commands	177
CEE Commands	178
FCoE Commands	182
Diagnostic Commands	183
Driver Parameter Commands	186
Dump Commands	189
LUN Masking Commands	190
Miscellaneous Commands	191
Persistent Binding Commands	195
TCP/IP Management Host File Commands	197
VPort Commands	197
WWN Management Commands	199
iSCSI Commands	200
ASCII Strings that May Be Returned	214
Troubleshooting	217
General Situations	217
Emulex Driver for Linux and OneCommand Manager Application Situations	219

Match case Limit results 1 per page

The OneCommand Utility User Manual

Page 46

Select the

Port Information

tab.

Figure 19:

Fibre Channel Port Information tab

Port Information Field Definitions

Port Attributes Area Field Definitions

•

Port WWN - The Port World Wide Name of the adapter.

•

Node WWN - The Node World Wide Name of the selected adapter.

•

Fabric Name or Host Name - The Fabric Name field is displayed in Host view. This is a 64-bit

worldwide unique identifier assigned to the fabric. The Host Name is displayed in Fabric view.

The host name is the name of the host containing the adapter. (Not supported on VMware ESX

servers being managed through the CIM interface.)

•

Boot Version - The version of boot code installed on the selected adapter port. If the boot code is

disabled, the field displays ”Disabled”.

•

Port FC ID - The Fibre Channel ID for the selected adapter port.

•

Driver Version - The version of the driver installed for the adapter.

•

Driver Name - The executable file image name for the driver as it appears in the Emulex driver

download package.

•

Firmware Version - The version of Emulex firmware currently active on the adapter port.

•

Discovered Ports - The number of mapped and unmapped ports found during discovery by the

Emulex adapter driver. The mapped ports are targets and the unmapped ports are non-targets

such as switches or adapters.

•

Port Type - The current operational mode of the selected adapter’s port.