HP ProLiant DL380p HP ProLiant DL380p Gen8 Server User Guide - Page 27
Remove the PCI riser cage
View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
5. Release the full-length expansion board retainer, and then remove the PCI riser cage. 6. Remove the full-length expansion board. To replace the component, reverse the removal procedure. Remove the PCI riser cage CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser cage. 1. Power down the server (on page 21). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Extend the server from the rack (on page 21). 4. Remove the access panel (on page 22). Operations 27
Operations 27
5.
Release the full-length expansion board retainer, and then remove the PCI riser cage.
6.
Remove the full-length expansion board.
To replace the component, reverse the removal procedure.
Remove the PCI riser cage
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
1.
Power down the server (on page
21
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend the server from the rack (on page
21
).
4.
Remove the access panel (on page
22
).