HP Professional ap550 Compaq Professional Workstation AP550 Maintenance & - Page 125
Error Codes, Microprocessor, Table 4-13, Microprocessor Test Error Codes
View all HP Professional ap550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Error Codes Microprocessor Error Code 101-xx 102-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 113-01 114-01 199-xx Diagnostic Tools 4-31 Table 4-13 Microprocessor Test Error Codes Description CPU test failed. Coprocessor error. DMA controller failed. Interrupt controller failed. Port error. Keyboard controller self-test failed. CMOS RAM test failed. CMOS interrupt test failed. CMOS clock test failed. Programmable timer test failed. Protected mode test failed. Speaker test failed. Installed devices test failed. Recommended Action Replace the system board and retest. Run Computer Checkup or Computer Setup and retest. Replace the processor and retest. Replace the system board and retest. Replace the system board and retest. Replace the system board and retest. Replace the system board and retest. The following steps apply to error codes 107-xx through 109-xx: 1. Replace the battery/clock module and retest. 2. Replace the system board and retest. Replace the system board and retest. Replace the system board and retest. 1. Verify that the speaker is connected. 2. Replace the system board and retest. 1. Check system configuration. 2. Verify cable connections. 3. Check switch settings. 4. Run the Diagnostics utility. 5. Replace the system board and retest.