HP Professional ap550 Compaq Professional Workstation AP550 Maintenance & - Page 94
with the alignment tabs., Replace the subpanel and front bezel
View all HP Professional ap550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Removal and Replacement Procedures 3-61 9. Gently pull the subpanel, with the bezel blank secured, away from the front bezel and rotate the bezel blank clockwise 90 degrees. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pin alignment. 1 2 Figure 3-54. Rotating the bezel blanks when converting a desktop 1 to a minitower 2 10. Replace the subpanel and front bezel, ensuring the subpanel and front bezel align properly with the alignment tabs. CAUTION: When replacing the subpanel, be sure the aligning pins and any remaining bezel blanks are in the proper orientation to prevent damage to the alignment pins. See Figure 3-7 for the subpanel keyed-alignment positions. 11. Reassemble the workstation. NOTE: When switching from desktop to minitower orientation, the bezel blank should be switched out with the replacement provided to ensure that the Compaq logo is properly oriented.