HP R1500 UPS R6000 Models User Guide - Page 26
Initiating a Self-Test, Audible Alarms, Test/Alarm Reset button
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Operation Initiating a Self-Test To initiate a self-test, press and hold the Test/Alarm Reset button (1) for three seconds. Figure 2-6: Test/Alarm Reset button Because a portion of the self-test requires battery power, the self-test will not be initiated if the batteries are less than 90 percent charged. If the UPS detects a problem, the LED illuminates solid red, and an audible alarm may sound. NOTE: Refer to Chapter 5, "Troubleshooting," for information on what to do if the self-test detects a problem. Audible Alarms The UPS sounds an audible alarm to warn of a problem. To identify the problem, select the Status option from the LCD Main Menu. The LCD will display X Alarms on the top line, where X is equal to the number of alarms. The bottom row describes the nature of the alarm condition. Scroll through multiple alarms using the up and down arrow keys on the Center button. For more information on displaying the alarms using the LCD menu, refer to the section, "Status," in Chapter 3. For causes and suggested actions for all alarm conditions, refer to Chapter 5, "Troubleshooting." 2-6 HP Uninterruptible Power System R6000 Models User Guide