HP R1500 UPS R6000 Models User Guide - Page 43
Removing the Battery Pack, Using a Philips screwdriver
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Battery Maintenance Removing the Battery Pack To replace the batteries:. 1. Place the UPS in Bypass mode using the manual switch located at the rear of the UPS. Figure 4-1: Placing the UPS in Manual Bypass mode 2. Using a Philips screwdriver, remove the lower front bezel by backing off the captive screws on each side. Figure 4-2: Removing screws from the lower front bezel HP Uninterruptible Power System R6000 Models User Guide 4-3
Battery Maintenance
HP Uninterruptible Power System R6000 Models User Guide
4-3
Removing the Battery Pack
To replace the batteries:.
1.
Place the UPS in Bypass mode using the manual switch located at the rear of the UPS.
Figure 4-1:
Placing the UPS in Manual Bypass mode
2.
Using a Philips screwdriver, remove the lower front bezel by backing off the captive
screws on each side.
Figure 4-2:
Removing screws from the lower front bezel