HP R1500 UPS R6000 Models User Guide - Page 27
Silencing an Audible Alarm, Shutting Down the System
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Operation Silencing an Audible Alarm To silence the alarm, press the Test/Alarm Reset button (1) and hold for two seconds. Figure 2-7: Test/Alarm Reset button IMPORTANT: Although the Test/Alarm Reset button silences the audible alarm, the condition that caused the alarm still exists. Refer to Chapter 5, "Troubleshooting," for information on what to do if the UPS detects an alarm condition. The silencing of the alarm is based on the current set of alarms that is present when the button is pressed. If the alarm set changes and at least one alarm condition still exists, the audible alarm reactivates. If the condition that caused the alarm is a utility power failure, the alarm is silenced shortly after utility power is restored. Shutting Down the System To shut down the system: 1. Place the UPS in Standby mode by pressing the Standby button. 2. Disconnect the AC mains by opening the switch or circuit breaker at the utility panel. HP Uninterruptible Power System R6000 Models User Guide 2-7