HP R1500 UPS R6000 Models User Guide - Page 33
Meters, up and down through the menu using the Center button. If the words continue off the screen
![]() |
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
LCD Configuration and Status Meters Select Meters on the Main Menu and press the Enter button to view the UPS voltage, frequency, and power. Main Menu → Meters This submenu provides information on virtual meters that monitor the UPS voltages. Scroll up and down through the menu using the Center button. If the words continue off the screen, scroll right and left to read the message. Press the Enter button to view selections. Table 3-3 lists the options under the Meters menu. Table 3-3: Meters Options LCD Display Input Volts x Output Volts x Input Frequency x Output Frequency x Output Power Output Power Battery Volts x Explanation The utility voltage. The voltage available at the UPS output receptacles. The utility voltage frequency in Hertz. The frequency in Hertz available at the UPS output receptacles. The output power is shown in a bar graph. This example shows 120% load (overload). There are ten squares in front of the 100% line. Each represents a 10% load. The two squares past the line each represent 10% of overload (20% overload in all). In contrast, this display shows a 60% load. The battery voltage. 3-6 HP Uninterruptible Power System R6000 Models User Guide
![](/manual_guide/products/hewlettpackard-rt3000-ups-r6000-models-user-guide-4874ede/33.png)