Home » HP Manuals » Desktops » HP Rp7410 » Manual Viewer

HP Rp7410 Site Preparation Guide, Second Edition - hp rp7405/rp7410 Servers - Page 19

Laser Safety

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Laser Safety NOTE If a Fibre Channel I/O card is present, the following laser safety statement applies. This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre communications port. In the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the plastic OLM housing. Outside the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in IEC 60825-1:1993 and EN 60825-1:1994, including Amendment 11:1996. NOTE If a DVD is present, the following laser safety statement applies. This product contains a laser internal to the Digital Versatile Disc (DVD) housing. In the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the DVD housing. Outside the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in IEC 60825-1:1993+A1 and EN 60825-1:1994+A11. xvii

Section	Page
1 System Specifications	21
Dimensions and Weights	22
<TABLE>	22
<TABLE>	22
electrical specifications	23
grounding	23
circuit breaker	23
System	23
power cords	23
<TABLE>	23
System Power Specifications	23
<TABLE>	23
<TABLE>	24
environmental specifications	25
temperature	25
operating environment	25
cell board	25
Non-Operating Environment	25
cooling	25
Cell Section Cooling	25
Bulk Power Supply Cooling	25
PCI/Mass Storage Section Cooling	26
Standby Cooling	26
Typical Power Dissipation and Cooling	26
<TABLE>	26
Acoustic Noise Specification	26
Air Flow	26
Figure11 Airflow Diagram	27
2 Facility Guidelines	29
Electrical Considerations	30
Electrical Load Requirements (	31
power considerations	32
Sources of Electrical Disturbances	32
Power System Protection	32
Distribution Hardware	33
Wire Selection	33
Raceway Systems (electrical conduits)	33
Building Distribution	33
Power Routing	33
grounding	34
Power Distribution Safety Grounding	34
Main Building Electrical Ground	34
Electrical Conduit Ground	34
Power Panel Ground	34
Computer Safety Ground	34
Cabinet Performance Grounding (High frequency Ground)	34
Raised Floor Grounding	35
Figure21 Raised Floor Ground System	36
Equipment Grounding Implementation Details	36
System Installation Guidelines	37
power wiring	37
Data Communications Cables	37
Environmental Elements	38
Computer Room Preparation	38
Basic Air Conditioning Equipment Requirements	38
air conditioning	39
Air Conditioning System Types	39
Basic Air Distribution Systems	39
<TABLE>	40
Air Conditioning System Installation	40
Humidity Level	40
Air Conditioning Ducts	41
Dust and Pollution Control	41
Electrostatic Discharge (ESD) Prevention	42
<TABLE>	42
Static Protection Measures	42
acoustics	43
Computer Room Safety	44
Fire Protection	44
lighting requirements	44
Facility Characteristics	45
floor loading	45
Raised Floor Loading	45
Floor Loading Terms	45
<TABLE>	45
Average Floor Loading	46
Typical Raised Floor Site	46
<TABLE>	46
Windows	47
space requirements	48
Delivery Space Requirements	48
Figure22 Cabinet Dimensions	48
Operational Space Requirements	48
Figure23 Footprint	49
Zinc Particle Contamination	50
3 Pre-installation Survey	51
Pre-installation Survey Content	52
Typical Installation Schedule	53
Site Inspection	54
<TABLE>	54
<TABLE>	54
Delivery Survey	57
Figure31 Delivery Survey (Part 1)	58
Figure32 Delivery Survey (Part 2)	59
A System Requirements Summary	61
Power Consumption and Air Conditioning	62
<TABLE>	63
<TABLE>	63
Power Consumption and Air Conditioning Requirement	64
<TABLE>	64
<TABLE>	64
Weight	66
<TABLE>	66
<TABLE>	66
B Templates	67
FigureB1 hp rp7405/rp7410 Space Requirements	68
Equipment Footprint Templates	69
Computer Room Layout Plan	70
FigureB2 hp rp7405/rp7410 Cabinet Template	71

Match case Limit results 1 per page

xvii

Laser Safety

NOTE

If a Fibre Channel I/O card is present, the following laser safety statement applies.

This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre

communications port.

In the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in the

Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is

indicated by a label on the plastic OLM housing.

Outside the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in

IEC 60825-1:1993 and EN 60825-1:1994, including Amendment 11:1996.

NOTE

If a DVD is present, the following laser safety statement applies.

This product contains a laser internal to the Digital Versatile Disc (DVD) housing.

In the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in the

Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is

indicated by a label on the DVD housing.

Outside the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in

IEC 60825-1:1993+A1 and EN 60825-1:1994+A11.