HP Scitex FB700 HP Scitex FB500 and FB700 Printer Series - User Guide - Page 83

System gt; Tools > User Cleaning and Maintenance, Clean Carriage Home Sensor, Proceed

Get HP Scitex FB700 PDF manuals and user guides View all HP Scitex FB700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the beginning of this section must be used. 1. From the control panel (System page > Tools > User Cleaning and Maintenance), select Clean Carriage Home Sensor. 2. Press Proceed to continue. The printer raises the printhead carriage rail and lowers the output roller. 3. Open the output-side door. Opening the output-side door will disable the carriage servo, allowing the carriage to be moved manually. 4. Pull the carriage out from the end of the rail to access the home sensor more easily. 5. Locate the home sensor (A in photo below). 6. Locate the upper and lower slits of the optical sensor. ENWW Clean the carriage home sensor (monthly) 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
NOTE:
Users of printers in California must disregard all references to the Printhead Flush or IPA in
the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid
specified at the beginning of this section must be used.
1.
From the control panel (
System page > Tools > User Cleaning and Maintenance
), select
Clean Carriage Home Sensor
.
2.
Press
Proceed
to continue.
The printer raises the printhead carriage rail and lowers the output roller.
3.
Open the output-side door.
Opening the output-side door will disable the carriage servo, allowing the carriage to be moved
manually.
4.
Pull the carriage out from the end of the rail to access the home sensor more easily.
5.
Locate the home sensor (A in photo below).
6.
Locate the upper and lower slits of the optical sensor.
ENWW
Clean the carriage home sensor (monthly)
77