HP Server Console 0x2x16 HP IP Console Switch with Virtual Media User Guide - Page 10
Required items not included, Optional item, Required tools, Rack-mounting the console switch
View all HP Server Console 0x2x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Required items not included • Interface adapters ("Installing the interface adapter" on page 21) One interface adapter is needed for each server or device. o USB 2.0 with Virtual Media o PS2 with Virtual Media o USB (not Virtual Media capable) o PS2 (not Virtual Media capable) o Serial o HP BladeSystem CAT5 KVM (not Virtual Media capable) • UTP CAT5 cable (CAT6 and CAT7 can also be used) Optional item Expansion module (not Virtual Media capable) Required tools The following tools are required for some procedures: • Phillips screwdriver • Cage nut insertion tool (included with your original rack hardware kit) Rack-mounting the console switch NOTE: Before installing the console switch into the rack, connect the console switch to a power source, using the power cords provided, and power on the unit. An activity indicator light ("Console switch components" on page 6) is displayed after a few seconds. If the activity indicator light does not display, be sure that the power is on, the power cord is connected, and the power source is valid. Several rack-mounting configurations include: • Side-mount o Type A-Square- and round-hole rails o Type B-Square-hole rails NOTE: The console switch cannot be side-mounted into a rack with round-hole rails. • Standard-mount • Cantilever-mount o Type A-Round-hole rails o Type B-Square-hole rails Installing the console switch 10