HP Server Console 0x2x16 HP IP Console Switch with Virtual Media User Guide - Page 75
Option 2-IP Configuration, Option 3-IP Address, Option 4-Netmask, Option, Default Gateway
View all HP Server Console 0x2x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4. To specify an IPv4 or IPv6 IP address, select Option 2-IP Configuration. Use a static IP address for ease of configuration. If you are using a BootP address, configure the BootP server to provide an IP address to the console switch, and then continue to step 7. 5. If you are using a static IPv4 address, perform the following steps: a. To specify an IP address, select Option 3-IP Address. b. To specify a netmask, select Option 4-Netmask. c. To specify a default gateway, select Option 5-Default Gateway. Console switch serial management 75
Console switch serial management
75
4.
To specify an IPv4 or IPv6 IP address, select
Option 2—IP Configuration
. Use a static IP address for
ease of configuration. If you are using a BootP address, configure the BootP server to provide an IP
address to the console switch, and then continue to step 7.
5.
If you are using a static IPv4 address, perform the following steps:
a.
To specify an IP address, select
Option 3—IP Address
.
b.
To specify a netmask, select
Option 4—Netmask
.
c.
To specify a default gateway, select
Option
5—Default Gateway
.