HP Server Console 0x2x16 HP IP Console Switch with Virtual Media User Guide - Page 44
Assigning names to servers, Setting up a scan pattern
View all HP Server Console 0x2x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Assigning names to servers 1. From the Names dialog box ("Assigning server and serial device names" on page 43), select the name or port number and click Modify. The Name Modify dialog box appears. 2. Enter a name in the New Name field. Names can be one to 15 characters in length. Permitted characters are case-sensitive and can consist of A-Z, 0-9, spaces, and hyphens. 3. Click OK to transfer the new name to the names list in the Names dialog box. 4. Repeat steps 1 through 3 for each server in the system. 5. Click OK to save settings, click X to exit, or press the Esc key to exit without saving settings. NOTE: Changes made in the Name Modify dialog box are not saved until you click OK in the Names dialog box. Setting up a scan pattern In Scan mode ("Activating Scan mode" on page 46), the console switch automatically scans port to port (server to server). Local port operation 44