HP Smart Tank Plus 650 User Guide - Page 113
Tips for working with ink and printhead, Make sure the ink tanks are not low on ink before printing.
View all HP Smart Tank Plus 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Tips for working with ink and printhead Printhead tips Use the following tips to work with printheads: ● Use original HP printheads. ● To protect the printheads from drying out, always turn the printer off using the Power button, and wait until the Power button light goes out. ● Do not open or untape printheads until you are ready to install them. Leaving tape on the printheads reduces ink evaporation. ● Install both the black and color printheads correctly. For more information, see Cartridge problem on page 135. ● After you have set up the printer, do not open the printhead latch unless instructed to do so. ● Align the printer for best print quality. See Printing issues on page 142 for more information. ● If you remove a printhead from the printer for any reason, try to replace it again as soon as possible. Outside of the printer, if unprotected, the printhead may begin to dry out. Ink tips Use the following tips to work with ink: ● Make sure the ink tanks are not low on ink before printing. For more information, see Ink levels on page 96. ● Refill the ink tanks when they are low on ink. Printing with the ink tanks low on ink may cause damage to your printer. ● Do not tilt the printer. NOTE: Original HP printheads and ink are designed and tested with HP printers and papers to help you easily produce great results, time after time. HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. ENWW Tips for working with ink and printhead 107