HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 37

Solid-state drive Description Solid-state drive, PCI 3x4, NVMe, TLC for use in 13-w000 - 13-w099 models 1-TB 512-GB 256-GB 128-GB Solid-state drive, PCI 3x4, NVMe, TLC for use in 13-ac000 - 13-ac099 models 1-TB 512-GB 360-GB 256-GB 128-GB Spare part number 865697-001 847110-009 847109-011 912322-002 865697-005 847110-014 917818-009 847109-016 912322-001 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the solid-state drive: 1. Remove the PM2.0×3.0 screw (1) that secures the solid-state drive to the computer. (The solid-state drive tilts up.) 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. Solid-state drive 29