HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 55
Rear fan
![]() |
View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Rear fan Description Rear fan (includes cable) Spare part number 907333-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the rear fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components: a. Battery (see Battery on page 26). b. Fan (see Heat sink fan on page 30). c. System board (see System board on page 39). Remove the rear fan: 1. Remove the webcam cable from the channel on the side of the fan (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the fan to the computer. 3. Rotate the side of the fan upward, and then remove the fan (3). Reverse this procedure to install the rear fan. Rear fan 47
![](/manual_guide/products/hewlettpackard-spectre-13w000-13w099-model-numbers-13ac000-13ac099-maintenance-service-guide-6aa464d/55.png)