HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 39

Audio/USB board

Get HP Spectre 13-w000 PDF manuals and user guides View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Audio/USB board Description Audio/USB board Audio/USB board cable for use in 13-w000 - 13-w099 models Audio/USB board cable for use in 13-ac000 - 13-ac099 models Spare part number 907336-001 907331-001 920127-001 Before removing the audio/USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the battery cable from the system board (see Battery on page 26). Remove the audio/USB board: 1. Release the zero insertion force (ZIF) connector (1) to which the cable is attached, and then disconnect the cable from the audio/USB board. 2. Remove the Phillips PM2.0×2.5 screw (2) that secures the audio/USB board to the computer. 3. Remove the audio/USB board from the computer (3). Reverse this procedure to install the audio/USB board. Audio/USB board 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Audio/USB board
Description
Spare part number
Audio/USB board
907336-001
Audio/USB board cable for use in 13-w000 – 13-w099 models
907331-001
Audio/USB board cable for use in 13-ac000 – 13-ac099 models
920127–001
Before removing the audio/USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Disconnect the battery cable from the system board (see
Battery
on page
26
).
Remove the audio/USB board:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the cable is attached, and then
disconnect the
cable from the audio/USB board.
2.
Remove the Phillips PM2.0×2.5 screw
(2)
that secures the audio/USB board to the computer.
3.
Remove the audio/USB board from the computer
(3)
.
Reverse this procedure to install the audio/USB board.
Audio/USB board
31