HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 44

Power button board

Get HP Spectre 13-w000 PDF manuals and user guides View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Power button board Description Power button board Power button board cable Spare part number 907337-001 907330-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 26). Remove the power button board: 1. Release the zero insertion force (ZIF) connector (1) to which the cable is attached, and then disconnect the cable from the power button board. 2. Remove the Phillips PM2.0×1.2 screw (2) that secures the board to the computer. 3. Lift the cable to disengage the adhesive that secures the cable to the computer (3). 4. Remove the power button board from the computer (4). Reverse this procedure to install the power button board. 36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Power button board
Description
Spare part number
Power button board
907337-001
Power button board cable
907330-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Remove the battery (see
Battery
on page
26
).
Remove the power button board:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the cable is attached, and then
disconnect the
cable from the power button board.
2.
Remove the Phillips PM2.0×1.2 screw
(2)
that secures the board to the computer.
3.
Lift the cable to disengage the adhesive that secures the cable to the computer
(3)
.
4.
Remove the power button board from the computer
(4)
.
Reverse this procedure to install the power button board.
36
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts