HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 43

TouchPad, Phillips PM2.0×2.0 screws

Get HP Spectre 13-w000 PDF manuals and user guides View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

TouchPad Description TouchPad for use in models 13-w000 - 13-w099 TouchPad for use in models 13-ac000 - 13-ac099 TouchPad cable Spare part number 907338-001 918034-001 907332-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Remove the battery (see Battery on page 26). Remove the TouchPad: 1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then disconnect the cable from the TouchPad. 2. Remove the five Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the computer. 3. Remove the TouchPad and cable (3). Reverse this procedure to install the TouchPad. TouchPad 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
TouchPad
Description
Spare part number
TouchPad for use in models 13-w000 – 13-w099
907338-001
TouchPad for use in models 13-ac000 – 13-ac099
918034-001
TouchPad cable
907332-001
Before removing the TouchPad, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Remove the battery (see
Battery
on page
26
).
Remove the TouchPad:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the TouchPad cable is attached, and then
disconnect the
cable from the TouchPad.
2.
Remove the
five
Phillips PM2.0×2.0 screws
(2)
that secure the TouchPad to the computer.
3.
Remove the TouchPad and cable
(3)
.
Reverse this procedure to install the TouchPad.
TouchPad
35