HP Spectre 13-w000 13-w099 Model numbers: 13-ac000 - 13-ac099 Maintenance and - Page 56
Display assembly
View all HP Spectre 13-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Display assembly Description Display assembly (full hinge-up; includes display panel cable, microphones, hinges, webcam, and wireless antenna cables and transceivers) Models: 13-w000 - 13-w099 Models: 13-ac000 - 13-ac099; display - FHD; computer color - natural silver Models: 13-ac000 - 13-ac099; display - FHD; computer color - dark ash silver Models: 13-ac000 - 13-ac099; display - UHD; computer color - natural silver Models: 13-ac000 - 13-ac099; display - UHD; computer color - dark ash silver Spare part number 907334-001 918030-001 918031-001 918032-001 918033-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components: 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the display assembly: 1. Open the computer to the interactive position, as shown in the following illustrations. 2. Release the ZIF connector and then disconnect the display cable from the system board (1). 3. Release the ZIF connector and then disconnect the audio cable from the system board (1). 48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts